- 13 -
5.3.2 Other accessories’ interfaces
5.4 Terminal wiring diagram
Relay wiring diagram shows how to wire the
relay to control the fuel pump:
5.4.1 Connect the 85 terminal(with small white
cable) to the positive pole of the vehicle
power(+12V/+24V), connect the 86 terminal(with
small yellow cable) to the 4# cable of the terminal.
5.4.2 Cut off the positive pole of the fuel pump, next
serial connect the positive pole to the 87a
terminal(with think green cable) of the relay, and
connect another pole to 30 terminal(with think green
To Next Page
Loading...