- 5 -
1、Red LED(indicates GSM working state)
0.2s on and o.2s off
(fast flicker)
Searching for GSM
network
0.2s on, 3s off
(intermittently flicker)
GSM/GPRS works
normally
2、Blue LED(indicates GPS signal state)
0.2s on and o.2s off
(fast flicker)
Searching GPS
Satellites
0.2s on, 3s off
(intermittently flicker)
GPS works normally
五、Installation
5.1Before Installation
5.1.1 Open the packing case, then check if the
terminal is Ok and the accessories are intact, or
please contact your dealer;
5.1.2 Choosing a SIM card: You need a
suitable SIM card for using the terminal, please
contact your dealer if you have any question;
5.1.3 Install the SIM card: First use your
thumb to press the SIM card cover, then push it
outside to pull down the SIM card cover. Now you
can insert your SIM card to the SIM card connector
until you cannot move the card inside anymore.
5.1.4 Uninstall the SIM card:Lift up the edge
of the SIM card, next pull it out.