- 16 -
六、Attentions for wiring
6.1 Power cables
6.1.1The standard input voltage of the terminal is
6V-36VD, so please choose the our original power
cables, the red cable is positive and the black
cable is negative; Please ground the positive pole
separately or ground it to ground connection, not
to any other ground.
6.1.2 Connect the ACC cable (orange cable) to
ACC switch of the vehicle, then the position server
can get the information about the vehicle power; the
ACC cable can also be connected directly to the
positive pole of the vehicle power, then the position
server think that the vehicle is always ignited.
6.1.3 Connect the 4# cable (yellow cable) to the 86
terminal(with small yellow cable) of the relay. Use
cable ties to fix the relay to waterproof place, or
use plastic bags to cover the relay..
6.2 External MIC
Using the external MIC cables we can have
remote voice monitoring; stick the MIC to some
places where we can make a call.
6.3 SOS cables
Using SOS cables we can make SOS call.
Please stick the SOS switch to the place where the
driver can touch.
To Next Page
Loading...