TECHNICAL DATA
ZTR Model 312
IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATING OR MAKING ADJUSTMENTS
SEAT ADJUSTMENT
1. Pull or lift body retention latch P/N 3934
from transaxle backing plate, raise
and push body and seat assembly
forward.
2. Loosen four seat adjustment knobs P/
N 1849 and slide seat forward or
backward to desired position.
3. Re-tighten seat adjustment knobs P/N
1849. DO NOT operate mower without
seat adjustment knobs properly
tightened.
4. Close upper body and push retention
latch. P/N 3934 over transaxle backing
plate.
BLOUNT COMPANY AIRPORT
INDUSTRIAL PARK
PO BOX 1569
COFFEYVILLE KS 67337 0945
316 251 2000
To Next Page
Need help?
General
