dji A3 User Manual

A3/A3Pro
User Manual
©
2016 DJI. All Rights Reserved.
31
How to reset the parameter: Aircraft nose orientation cannot be reset during ight.
How to stop or exit the ight mode: Click the “Exit” button during ight.
Home Lock
Pull the pitch stick backward to move the aircraft toward its recorded Home Point.
Conditions of Use: Home point recorded; in the P-GPS mode; distance between the aircraft and
home point is larger than 5 meters.
How to operate: Tap the Home Lock icon to start.
How to reset the parameter: None.
How to stop or exit the ight mode: Click the “Exit” button during ight.
POI
(
point of interest)
The aircraft will orbit around the subject automatically to allow the operator can be more focus on
framing their shoot on the subject in Point of Interest.
Conditions of Use: in the P-GPS mode; distance between the aircraft and interest point is larger
than 5 meters and smaller than 10 meters.
How to operate: Set the interest point -> Operate the aircraft to set the distance and the ight
velocity -> Tap the POI icon to start the ight.
How to reset the parameter: The distance and the ight velocity can be changed during the ight
when you operate the aircraft.
How to stop or exit the ight mode: Click the “Exit” button during ight.
Waypoints
Record a ight path, then the aircraft will y along the same path repeatedly while you control the
camera and orientation. The ight path can be saved and re-applied in the future.
Conditions of Use: in the P-GPS mode; Distance between the way points is larger than 5 meters
and less than 500 meters; automatically detect the battery level for the smart ight battery (or
voltage for LiPo batteries).
How to operate: Operate the aircraft to the target position and set the aircraft nose orientation ->
Tap to record the waypoints-> Set the Waypoint mode (Consistent with record, Consistent with
route, Free) -> Set the ight velocity and Failsafe option->Save in the App-> Start.
How to reset the parameter: The aircraft orientations are different in each mode. Operate the
aircraft to y forwards or backwards.
How to stop or exit the ight mode: Click the “Exit” button during ight.
Dierence between the three modes:
Free: The aircraft nose can be changed during the waypoint ight.
Consistent with record: Aircraft nose orientation of every waypoint are pre-recorded. And the

dji A3 Specifications

Flight Performance

hovering accuracy (vertical)	±0.5 m
hovering accuracy (horizontal)	±2 m
max wind resistance	10 m/s
max yaw angular velocity	150°/s
max pitch angle	35°
max ascent velocity	6 m/s
max descent velocity	6 m/s

Power and Environment

power consumption	Max 21 W (Typical Value: 0.41 A @ 51 V)
operating temperature	14° to 113° F (-10° to 45° C)