EasyManua.ls Logo

dji AGRAS MG Series - User Manual

dji AGRAS MG Series
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Series Spreading System
2020.03
v1.0
使用说明
User Guide
Question and Answer IconNeed help?

Do you have a question about the dji AGRAS MG Series and is the answer not in the manual?

dji AGRAS MG Series Specifications

General IconGeneral
Spray Tank Capacity10 L
Battery Capacity12000 mAh
Max Spraying Speed8 m/s
Max Payload10 kg
GNSSGPS + GLONASS

Summary

Disclaimer

Warnings

Aircraft and Material Compatibility

Compatibility with DJI Agras MG series aircraft and material specifications (0.5-5 mm diameter).

Load Capacity and Installation Precautions

Internal tank load limit (10 kg) and threadlocker requirement for installation.

Operational Safety and Radar Module

Safety checks, safe distance, and radar module detection range adjustments.

Cleaning Guidelines

Recommends dry compressed air for cleaning; avoid liquids.

Introduction

In the Box

Overview

Installation

Mount Landing Gear Extenders

Attaching landing gear leg extenders to Agras MG-1S aircraft.

Mount Fender (Optional)

Attaching the fender to prevent material spread to the rear of the aircraft.

Mount Spreading System to Aircraft

Securing the spreading system to the aircraft's landing gear legs.

Connect Expansion Port Cable

Connecting the spreading system cable to the aircraft's expansion port.

Usage

Add Materials and Power On

Loading materials into the tank and powering on the remote controller and aircraft.

Configure Operation Settings

Adjusting hopper outlet size, spinner speed, and flying speed via the app.

Recommended Usage Parameters

Specific settings for Spreading System 1.0 and 2.0 for optimal performance.

Select Operation Mode

Entering the desired spreading operation mode.

Route and Manual Operation Modes

Explanation of Route, A-B Route, Manual Plus, and Manual Operation Modes.

Spreading System Calibration

Calibration Trigger Conditions

Scenarios requiring system calibration, like gate issues or incorrect readings.

Calibration Procedure Steps

Instructions for performing calibration via the DJI app.

Maintenance

Cleaning and Residue Removal

Regular cleaning of the spread tank and spreader using dry air.

Spinner Disk Replacement

Step-by-step guide for replacing the consumable spinner disk.

Specifications

Compliance Information

Related product manuals