dji AGRAS MG Series - Specifications

EN
Operate with caution to avoid injury caused by mechanical parts.
Specications
Compatible Aircraft* Agras MG-1S, Agras MG-1S Advanced, Agras MG-1P series
Weight
Spreading System 1.0: 1.8 kg
Spreading System 2.0: 2.1 kg (excluding fender)
Spread Tank Volume 13 L
Spread Tank Internal Load 10 kg
Compatible Material Diameter 0.5 - 5 mm
Max Hopper Outlet Area Spreading System 1.0: 8.6 cm
2
,
Spreading System 2.0: 32.3 cm
2
Spreading Range
Varies according to material diameter, spinner disk rotating
speed, hopper outlet size, and ying altitude. For best operating
performance, it is recommended to adjust the corresponding
variables to achieve a spreading range of 4 - 6 meters (for
Spreading System 1.0) or 5 - 7 meters (for Spreading System 2.0).
* The firmware of the aircraft must be the correct version for supporting the Spreading System.
Check the release notes of the corresponding aircraft on the ofcial DJI website.