4. Examine and check all warning messages on the aircraft status list displayed in the app prior to each flight.
5. Cache the map data of the area where you intend to fly the aircraft by connecting to the internet before each
flight.
4G Dongle
Notice
1. A dongle and SIM card are required for some product features in the DJI Agras app and users will bear the
cost of these extras.
2. Be sure to use a DJI approved dongle.
3. DJI accepts no liability for accidents caused by the loss of user data or aircraft malfunctions originating from
third party dongles and SIM cards.
4. Only use SIM cards that are compatible with the dongle.
5. Make sure you mount the dongle and the SIM card correctly. Otherwise, related functions will not be available.
Product Care
Storage and Transportation
Warning
To avoid component malfunction, serious injury, and property damage, observe the following rules:
1. Small parts, such as cables and straps, are dangerous if swallowed. Keep all parts out of reach of children and
animals.
2. Make sure to remove the battery from the aircraft during transportation.
3. Remove or empty the spray tank during transportation or when not in use to avoid damaging the landing gear.
Store the aircraft in a cool dry place.
Maintenance
To avoid component malfunction, serious injury, and property damage, observe the following rules:
1. Clean all parts of the aircraft at the end of each day of spraying after the aircraft returns to a normal
temperature. DO NOT clean the aircraft immediately after operations are completed.
1. Fill the spray tank with clean water or soapy water and spray the water through the nozzles until the tank
is empty. Repeat the step two more times.
2. Detach the spray tank and spray tank connector to clean them (for T10 only). Remove the spray tank
strainer, nozzle strainers, and nozzles to clean them and clear any blockage. Afterwards, immerse them
in clean water for 12 hours.
3. Make sure that the aircraft structure is completely connected so that it can be washed directly with water.
It is recommended to use a spray washer filled with water to clean the aircraft body and wipe with a soft
brush or wet cloth before removing water residue with a dry cloth.
4. If there is dust or pesticide liquid on the motors, propellers, or heat sinks, wipe them with a wet cloth
To Next Page
Loading...
