dji Cendence User Guide

5
Using the Remote Controller
Stick mode is set to Mode 2 by default (left hand throttle). The left stick controls the aircraft’s elevation and heading. The
right stick controls the aircraft’s forward, backward, and lateral movements. To adjust the FPV camera, press and hold the
C2 Button and rotate the left dial.
Left Stick
Right Stick
FPV Camera
● You can change the stick mode, and mapping the C1-C4, BA-BH buttons function in the DJI GO app.
Specifications
Remote Controller（Cendence）
Model
GL800A
Operating Frequency
Power Supply
Extended Intelligent Battery (Model: WB37-4920mAh-7.6V)
Intelligent Battery
4923
mAh LiPo
Charging
DJI charger
Output Power
20 W (supplying power to DJI CS550 monitor);
12 W (without supplying power to monitor)
Video Output Ports
USB,
HDMI,
SDI
USB Power
Supply
iOS: 1 A,
5.2 V (Max); Android: 1.5 A,
5.2 V (Max)
Dual User Capability
Host-and-Slave connection
Operating Temperature
-4° to 104° F (-20° to 40° C)
Storage Temperature
Less than 3 months: -4°to 113°F (-20°to 45°C)
More than 3 months: 72°to 82°F (22°to 28°C)
Charging Temperature
32°to 104°F (0°to 40°C)
Charging Time
About 2
hours and 24
minutes (using a 180W charger)
Supply Power
Time
About 4
hours
(only Master remote controller function enabled and
without supplying power to monitor)
Weight
1041 g
2.4G: LB:2404-2478.8MHz; 10M:2412-2462MHz
5.8G: LB:5727-5821.3MHz; 10M:5745-5825MHz

dji Cendence Specifications

General

Brand	dji
Model	Cendence
Category	Remote Control
Language	English