dji CHX503-7000 - Battery Station Activation; Activation Methods

©
2021 DJI All Rights Reserved.
7
EN
T30 Intelligent Battery Station: T10 Intelligent Battery Station:
3. Attach the panel and secure using the screws.
Activation
The battery station requires activation before using for the rst time. If the warning indicator is solid
green, it means the battery station has not been activated. Follow the steps below to activate the
battery station:
Method 1: Using the DJI MG App or DJI Agras App
1. Connect the battery station to a power outlet.
2. Connect the battery station to the remote controller using a USB-C cable.
3. Press the power button to power on the battery station.
4.Runtheappandfollowthepromptstonishactivation.
Method 2: Using DJI Assistant 2 for MG
1. Connect the battery station to a power outlet.
2. Connect the battery station to the PC using a USB-C cable.
3. Visit www.dji.com to download DJI Assistant 2 for MG. Install and run the software.
4. Press the power button to power on the battery station.