To Next PageTo Next Page
Need help?Do you have a question about the dji C8000 and is the answer not in the manual?
General| Brand | dji |
|---|---|
| Model | C8000 |
| Category | Battery Pack |
| Language | English |
Specifies the AC input current and power outlet requirements for safe operation.
Warns against connecting two AC power cables simultaneously when using the station indoors.
Advises understanding and complying with local laws for aircraft charging purposes.
Prohibits use in direct sunlight, rain, damp environments, or near heat/flammable gases.
Specifies the required temperature range and surface for battery station placement.
Recommends using a dry powder fire extinguisher and avoiding liquid ones.
Instructs not to unplug cables during use and to remove batteries after charging.
Advises wiping the station with a clean, dry cloth if buildup is noticeable.
Caution against using the battery station during a thunderstorm.
Recommends referring to the battery document for additional safety instructions.
Warns against carrying the battery station by its charging cables to prevent damage.
Advises maintaining a distance from stored batteries to prevent overheating or fire hazards.
Instructs to keep the station away from flammable materials and avoid carpeted surfaces.
Details connecting to DJI Assistant 2 or remote controller for updates.
Details the physical components of the C8000 Intelligent Battery Station, including ports and storage.
Explains the functionality of the operation panel, LEDs, warning indicator, and power button.
Steps for activating the battery station using a compatible mobile application.
Instructions for activating the battery station using DJI Assistant 2 software.
Procedure for connecting batteries to the station and initiating the charging process.
Describes the status LEDs for the battery station's operational modes and readiness.
Explains the LED blinking patterns and sounds during battery charging.
Details the conditions that trigger the warning indicator and their corresponding meanings.
Steps to update the battery station firmware using a remote controller.
Instructions for updating the battery station firmware with DJI Assistant 2 software.
Guidance on how to safely store the battery station and its cables when not in use.
Instructions for cleaning the battery station's dustproof covers for optimal performance.
Details the FCC compliance for the C8000 Intelligent Battery Station.
Information regarding Industry Canada (ISED) compliance for the device.
Notices related to European Union and United Kingdom compliance standards.
Provides contact information and QR codes for DJI technical support.
