dji D-RTK - Mounting the D-RTK onto the M600 Pro; Preparing the Cables

©
2017 DJI All Rights Reserved.
11
Mounting the D-RTK onto the M600 Pro
Matrice 600 Pro Accessories
Quick-Release Base Bracket×2 Quick-Release Top Bracket×2 Upper Expansion Plate×1
Preparing the Cables
1. Organize the ight control system’s cables.
2. Unscrew the six screws to remove the M600 PRO’s top shell.
3. Connect the D-RTK Air System Power Cable II to the BMS board’s XT30 port.
Antenna Bracket III×4 Knurled Screw×2 Antenna Clip×2 Screw Package×1
M3.0×6.5
M3.0×7.8