dji D-RTK - Connection; Usage; Configuring Parameters Using DJI Assistant 2

©
2017 DJI All Rights Reserved.
7
• Use the Air System Power Cable
II
if using the D-RTK with other types of aircraft.
• Connect the Ground System and the Air System one by one to the computer for rmware
upgrade. Power cycle the DATALINK PRO, Flight Control System and D-RTK after upgrading.
• Supports Windows 7 (or later) or Mac OS X 10.9 (or later).
Usage
Conguring Parameters Using DJI Assistant 2
IMPORTANT: The Ground System and Air System should be connected to the computer separately and
activated. Be sure to congure parameters with DJI Assistant 2 for rst time use.
1. Download DJI Assistant 2 from www.dji.com and install it on your computer.
2. Connect the Ground System to the computer with DJI Assistant 2 launched, and then go to Connected
Devices > D-RTK to congure the coordinates.
3. When conguring the Air System, ensure the A3 Flight Control System is connected. Connect the
Flight Control System to the computer with DJI Assistant 2 launched. Select the connected Flight
Control System from the Connected Devices page, and then go to DJI Devices > Air System Antenna
to congure antenna oset parameters.
Conguring the Air SystemConguring the Ground System