Control Levers
The control levers have four functions: throttle, rotation, front/back movement,
and side to side movement. Listed below are the controls under normal configuration.
The throttle is adjusted by moving the left control stick up and down. Since the
throttle needs to be stable, when you adjust this lever up and down, it does not spring
back to its original position like the other levers.
The rotation is controlled by adjusting the left control stick left/right. When
moving the control stick left/right, it will spring back to its original position, giving a
normal state of no rotation, as opposed to the throttle which stays wherever you put it.
The right control lever adjusts front/back and side/side movement, exactly as is
intuitive. Moving the stick up/down tilts the quadcopter so that it travels
forward/backward. Moving the stick left/right tilts the quadcopter so that it travels
left/right.
To Next Page
Loading...
