Specications
Power consumption 3 W
Voltage 3.85 V
Battery Capacity/Energy 4730 mAh/18.21 Wh
Operating Temperature -4° to 104° F (-20° to 40° C)
Charging Temperature 32° to 95° F (0° to 35° C)
Operating Time 5 hours
Charging Current 2 A
Charging Time 2 hours
DC IN 9-26 V
DC OUT 5 V/1 A
RONIN is a trademark of DJI OSMO.
Copyright © 2018 DJI OSMO All Rights Reserved.
This content is subject to change.
Download the latest version from
https://www.dji.com/force-pro
• The latest rmware is required if using the DJI Force Pro with the
Ronin-S and Inspire 2. Please check the rmware version.
• DO NOT mix up the Inspire 2 RC CAN Bus cable and Wireless
Receiver CAN Bus cable, otherwise it may damage the device.
• Make sure connect the DJI Force Pro to Inspire 2's Master remote
controller.
To Next Page
Loading...