dji Force Pro - System Management and Maintenance; System Settings and Calibration; Charging and Firmware Updates

8
General: Includes the Calibrate System, Binding, operating Wi-Fi frequencies,
and gimbal working modes.
Prole: Custom motor congurations can be saved or reset to default settings.
Camera Page
Control camera recording and various other supported settings when a camera
control cable is attached.
Remote Freq.
Bind Remote
2.4HzStart
Axis Mode
3-axis
Calibrate System
More
12
0º
2
60%
General
Settings
Motor: Displays the power, angle, and temperature of the motors.
Device: Displays the connection status with other devices.
Log: Displays any abnormal status information of the gimbal.
System Settings
Charging
Use the provided USB-C cable to charge the Force Pro using a USB charger
(not provided).
Connect the DC IN port during usage to power the Force Pro. Connect the DC
OUT port to use the Force Pro to power the connected device.
Charging time: ≈ 2 hours
(when charging at 2 A with the Force Pro powered off)
Updating Firmware
Connect the USB-C port on the Force Pro and the DJI Pro Assistant for Ronin
and follow the onscreen instructions to update the rmware.