8
©
2017 DJI All Rights Reserved.
INSPIRE 2
User Manual
Preparing Remote Controller
Tilt the Mobile Device Holder to the desired position then adjust the antenna as shown.
1SFTTUIFCVUUPOPOUIFTJEFPGUIF.PCJMF%FWJDF)PMEFSUPSFMFBTFUIFDMBNQBEKVTUJUUPmUUIFO
attach your mobile device.
2. Connect your mobile device to the remote controller with a USB cable.
3. Plug one end of the cable into your mobile device, and the other end into the USB port on the
back of the remote controller.
Attaching 1550T Quick Release Propellers
Following the steps below to attach the 1550T quick release propellers.
1. Pair the propellers and motors with arrows of the same color (red or white).
Press down the spring pad and rotate
the propeller lock until the arrows are
aligned and you hear a click.
Attach the propeller
onto the motor.
Again, rotate the propeller lock
until you hear a click.
2 3
1
1
3
2
Make sure to press down the spring pad before rotating the propeller lock.
To Next Page
Loading...
Need help?
General
