5
EN
The Stick Mode is set to Mode 2 by default. In Mode 2, the left stick controls the aircraft’s elevation and heading, and the
right stick controls the aircraft’s forward, backward, and lateral movements. To adjust the FPV camera, press and hold the C2
Button and rotate the left dial.
For more information about how to connect and use the remote controller, please refer to the user manual.
You can change the stick mode and customize the C1-C4 and BA-BH buttons’ functions in the DJI Pilot app.
Using the Remote Controller
Left Stick Right Stick FPV Camera
1
2
Unfold the D-RTK antennas and then turn the knob tightly in the direction indicated by the lock icon .
4. Preparing the Aircraft
Unfolding the D-RTK Antennas (for M210 RTK V2 only)
For the aircraft to take off, the D-RTK antennas must be fully unfolded and securely locked.
Installing the Landing Gears Unfolding the Aircraft
Unfold the frame arm, slide the arm lock to the end of the frame
arm, then rotate it about 90° until the silver line lies within the
range of the
icon.
RightLeft
Backward
Forward
Turn RightTurn Left
Down
Up
To Next Page
Loading...
Need help?
General
