dji MAVIC PRO

Appendix
Mavic Pro User Manual
©
2016 DJI All Rights Reserved.
57
Using DJI Assistant 2
Follow the instructions below to update the rmware through DJI Assistant 2:
1. Connect the aircraft to a computer with a USB cable.
2. Launch DJI Assistant 2 and login with your DJI account.
3. Select “Mavic Pro” and click on the “Firmware Updates” on the left panel.
4. Select the rmware version that you wish to update.
5. Wait for the rmware to be downloaded and rmware update will start automatically.
6. Reboot the aircraft after the rmware update is complete.
The remote controller can be connected to a computer for upgrades. Turn off the remote controller and
connect the charging port to the computer, then turn on the remote controller. The remote controller and
the aircraft can be upgraded simultaneously.
The rmware update will take around 15 minutes. It is normal that the gimbal goes limp, aircraft
status indicator blinks abnormally and the aircraft reboots. Please wait patiently until the update
is complete.
There will be no sound prompts during the update.
Ensure the computer has access to the Internet.
Ensure the battery level is adequate for the Intelligent Flight Battery.
Do not disconnect the aircraft from the computer during rmware update.
Intelligent Flight Mode
Intelligent Flight mode includes Course Lock, Home Lock, Point of Interest (POI), Follow Me and
Waypoints features to assist users to create professional shoots during the ight. Course Lock and Home
Point lock helps to lock the orientation of aircraft so that the user can focus more on other operations.
Point of Interest, Follow Me and Waypoints mode enable aircraft to y automatically according to the
pre-set ight maneuvers.
Course Lock
Lock the current nose direction as the aircraft’s forward direction. The aircraft will
move in the locked directions regardless of its orientation (yaw angle).
Home Lock Pull the pitch stick backward to move the aircraft toward its recorded Home Point.
Point of Interest
The aircraft will orbit around the subject automatically to allow the operator can be
more focus on framing their shoot on the subject in Point of Interest.
Follow Me
A virtual tether is created between the aircraft and the mobile device so that the
aircraft can track your movement as you move. Note that Follow Me performance is
subject to the GPS accuracy on the mobile device.
Waypoints
Record a flight path, then the aircraft will fly along the same path repeatedly
while you control the camera and orientation. The ight path can be saved and
re-apply in the future.
Enable Multiple Flight Mode by launching the DJI GO app > Camera View > > Multiple Flight Mode
before using the Intelligent Flight Mode for the rst time.