dji OSMO MOBILE 3 Quick Start Guide

3. Mounting and Balancing a Mobile Phone
Make sure to only mount and balance a mobile phone while the Osmo Mobile 3 powered off.
Place the mobile phone in the mobile phone holder while pulling out the holder. Make sure the DJI
logo of the phone holder is upright.
Hold the tilt arm. Adjust the position of the mobile phone. The tilt axis is balanced if the mobile
phone remains still when released.
Rotate the mobile phone to portrait mode. Hold the tilt arm. Pull the mobile phone holder left or
right to balance. The roll axis is balanced if the mobile phone remains level when released.

dji OSMO MOBILE 3 Specifications

General

Type	Smartphone camera stabilizer
Material	-
Functions	Panorama, Timelapse, Slow Motion, Sport Mode
Motorized	Yes
Product color	Gray
Number of axis	3
Maximum device depth	9.5 mm
Maximum device width	88 mm
Minimum device width	62 mm
Maximum weight capacity	0.23 kg
Charging time	2.5 h
Operating time	15 h
Battery voltage	7.2 V
Battery capacity	2450 mAh
Operating temperature (T-T)	0 - 40 °C
Mechanical pan range	-162.5 - 170.3 °
Mechanical roll range	85.1 - 252.2 °
Mechanical tilt range	104.5 - 235.7 °
Bluetooth version	5.0
Cables included	USB

Weight and Dimensions

Depth	103 mm
Width	125 mm
Height	285 mm
Weight	405 g
Dimensions folded (WxDxH)	130 x 46 x 157 mm