EN
©
2018 DJI All Rights Reserved.
5
Updating the Firmware
DJI will release firmware updates when available. Refer to the official DJI
website and follow the instructions below to update the rmware.
1. Download the latest rmware update program from the ocial DJI website.
(http://www.dji.com/product/phantom-4/info#downloads)
2. Turn on the Charging Hub, then connect it to a computer using a Micro
USB cable.
3. Run the rmware update program. Press the update button and wait for
the process to nish.
4. The Charging Hub will automatically restart when the update has been
successfully completed.
5. Repeat this process if the rmware update fails for any reason.
Specications
Model PHANTOM 4 CHARGING HUB
Compatible Battery Charger Phantom 4 Charger (PH4C100)
Compatible Battery Model
PH4-5350mAh-15.2V
PH4-5870mAh-15.2V
Operating Temperature 41° to 104° F (5° to 40° C)
Operating Voltage 17.5 V
Weight 162 g
To Next Page
Loading...
