dji RC Motion 2 - Shutter;Record Button; Accelerator Control; USB-C Port; Power Button and Linking

DJI RC Motion 2 User Manual
6
©
2023 DJI All Rights Reserved.
6. Shutter/Record Button
Press once: take a photo or start/stop recording.
Press and hold: switch between the photo and video modes.
7. Accelerator
Press to fly the aircraft in the direction of the circle in the goggles. Push forward to fly
the aircraft backward. Apply more pressure to accelerate. Release to stop and hover.
8. USB-C Port
9. Power Button/Link Button
Press the power button once to check the current battery level.
Press, and then press and hold to power the motion controller on or off.
When powered on, press and hold the power button to initiate linking.‘
10. Lanyard Hole