4. Linking
The remote controller is already linked to the aircraft when it is purchased together as part of
a combo. Otherwise, follow the steps below to link the remote controller and the aircraft after
activation.
1. Power on the remote controller and the aircraft.
2. Press the customizable C1 button, customizable C2 button, and the record button
simultaneously. The status LED will blink blue and the remote controller will beep twice to
indicate linking has started.
3. Press the linking button of the aircraft. The status LED of the remote controller will turn solid
green if linking is successful.
Refer to the DJI RC Pro User Manual for more information about linking.
To download the user manual, visit https://www.dji.com/rc-pro
To Next Page
Loading...
