1. Charging and Checking Battery Level
• It is recommended to use an FCC/CE certied USB charger rated 12 or 15V.
• Recharge the battery at least every three months to prevent over discharging. The battery
depletes when stored for an extended period.
Check battery level: press power button.
Power on/o: press, then press and hold.
Low HighBattery
The built-in battery is placed in hibernation
mode before delivery. It must be charged before
using for the rst time.
It takes approximately two hours to fully charge
the remote controller using a recommended
USB charger rated 12V and one and a half hours
using a recommended USB charger rated 15V.
USB
Charger
USB-C Cable
Power Outlet
100~240 V
To Next Page
Loading...
