dji Remote Controller C2 - Page 5

EN
4. Flight
The default Stick Mode is Mode 2. In Mode 2, the left stick controls the aircraft's
altitude and heading, while the right stick controls forward, backward, and left and right
movements.
Specications
Operating Frequencies 2.412-2.462 GHz; 5.745-5.825 GHz
Max Transmission Distance
(unobstructed, free of interference)
2.4 GHz: 1.2 mi (2 km, FCC); 0.31 mi (0.5 km, CE);
0.31 mi (0.5 km, SRCC)
5.8 GHz: 1.2 mi (2 km, FCC); 0.19 mi (0.3 km, CE);
0.75 mi (1.2 km, SRCC)
Operating Temperature Range 32° - 104℉ (0° - 40℃)
Built-in Battery 2970mAh
Operating Voltage 950 mA @3.7 V
Supported Mobile Device Size Thickness supported: 6.5mm-8.5mm;
Max length: 160mm
Left Stick Right Stick
Up
Forward
Down
Turn Left Turn Right
Backward
Left Right
The Combination Stick Command
(CSC) can be used to start or stop the
motors.
Takeoff
Push the left stick up slowly to
takeoff.
Landing
Pull the left stick down slowly until you
touch the ground. Hold the left stick down
for a few seconds to stop the motors.