To Next Page

To Previous Page

3. Activating your Smart Controller

4. Linking

Please check the internet connection if activation fails. If the internet connection is normal,

please retry to activate the Smart Controller. Contact DJI if activation fails several times over.

Internet

A brand new Smart Controller needs to be activated rst. Activation requires

an Internet connection.

When the Smart Controller is purchased together with an aircraft as a combo, it is

already linked to the aircraft. If not, please follow the steps below to link the Smart

Controller and the aircraft after successful activation.

1. Power on the Smart Controller and the aircraft.

2. Press down the customizable buttons C1, C2, and the record button simultaneously.

The status LED will blink blue and the Smart Controller will sound a double beep to

indicate that linking starts.

3. Press the aircraft’s linking button and then release. The Smart Controller’s status

LED will be solid green if linking is successful.

Power on the

Smart Controller

Select a

Preferable Language

Follow the

Prompts to Activate

Hello

Welcome

Start

Please refer to the DJI Smart Controller User Manual for more linking methods.

To download the manual, please visit http://www.dji.com/dji-smart-controller.

Questions and Answers:

Need help?

Do you have a question about the dji RM500 and is the answer not in the manual?

dji RM500 Specifications

General