dji RONIN 4D Quick Start Guide

EN
8
©
2021 DJI OSMO All Rights Reserved.
DJI Ronin 4D Quick Start Guide
Top Handle
1. Top Screw Hole
3/8”-16 with a depth of 10 mm.
2. M Button
Press and hold to enter Sport mode. Release to exit from
Sport mode.
3. Tilt Slider
Used to control the tilt of the gimbal.
4. Side Screw Hole
1/4”-20 with a depth of 9 mm.
High-Bright Main Monitor
1. Parameter Buttons
Press to open the corresponding parameters on the monitor.
Press again to confirm the selection. Some parameters have
advanced settings that can be accessed by pressing and holding
the corresponding parameter button.
2. Playback Button
Press once to enter or exit playback. Press and hold to enter or
exit full screen display.
3. Dial
Turn the dial to scroll through the options and press to confirm
the selection.
4. Home Button
Press to enter or exit from menu.
5. Focus Peak Button
Press once to enable or disable the focus assist display.
6. LUT Button
Press once to enable or disable the LUT display.
7. EXP Button
Press once to enable or disable the exposure display.
※
This content is subject to change without prior notice.
3
1
2
4
5
6
7
1
4
3
2
1
when not in ActiveTrack.
Press and hold to start ActiveTrack when in Smart mode
with a selected subject. When not in Smart mode, press
and hold to switch between Follow and Lock mode.

dji RONIN 4D Specifications

General

Camera Sensor	Full-Frame CMOS
Dynamic Range	14+ stops
Battery	TB50 Intelligent Battery
Sensor Size	36 x 24 mm
Video Resolution	6K (4096 x 2160)
Lens Mount	DL mount, with E-mount compatibility via adapter
Stabilization	4-axis stabilization
Recording Formats	Apple ProRes 422 HQ, H.264
Frame Rates	Up to 6K/60fps, 4K/120fps
Storage	CFexpress Type-B
Audio Input	3.5mm
Display	5.5-inch touchscreen
Battery Life	Approx. 2.5 hours
Internal ND Filters	Built-in ND filters (ND 2 to ND 512)
Weight	Approx. 4.67 kg (without lens)