dji RONIN-S Focus Motor - Introduction; Installation

EN
2
Introduction
The RONIN
TM
-S Focus Motor is used with the Ronin-S Focus Wheel to control the focus, iris, and
zoom.
Installation
1. Select and attach the 15 mm rod to the rod mount according to the camera lens.
2. Attach the rod mount to the camera riser.
Screw Focus Gear Strip Power Cable
×4 ×2 ×1
1
2
3
4
5
1. Status Indicator
2. Function Button
3. CAN Bus Port
4. Rod Clamp
5. Gear