Need help?Do you have a question about the dji Focus Pro and is the answer not in the manual?
General| Operating Frequency | 2.400-2.4835 GHz; 5.725-5.850 GHz |
|---|---|
| Charging Time | Approx. 1.5 hours |
| Compatibility | DJI Ronin series gimbals |
| Connection | DJI Ronin 4D, DJI Ronin series gimbals, DJI High-Bright Remote Monitor |
| Battery Life | Approx. 3.5 hours |
| Storage Temperature | -20°C to 45°C |
Guidance on navigating the manual, searching for topics, and introductory information.
Introduction to the main product components: Motor, LiDAR, Grip, and Hand Unit.
Steps for activating the grip via the DJI Ronin app.
Instructions for mounting the grip onto a camera cage or rod system.
Steps for mounting the LiDAR to the camera and connecting it.
Measuring and inputting the distance between the camera sensor and LiDAR.
Steps for preparing, powering, and activating the Hand Unit.
Procedure for linking the Hand Unit to the motor for wireless control.
Attaching the motor and lens gear for use with DJI RS gimbals.
Calibrating the motor when used with DJI RS gimbals.
Instructions for updating firmware on the Grip, Hand Unit, Motor, and LiDAR.
General safety warnings and precautions for using the grip.
Guidelines for charging, storing, and maintaining the grip's battery.
Notices for traveling with the grip and proper disposal procedures.
Technical specifications for the LiDAR unit.
Technical specifications for the Grip and Hand Unit.
Technical specifications for the Motor unit.
To Next Page
