dji Focus Pro - Calibrating Lens via Ronin App

DJI Focus Pro User Manual
24
©
2024 DJI All Rights Reserved.
Calibrating Lens via Ronin App
If the lens prole is congured in the Ronin app, lens calibration can be shortened using the
Ronin app.
1. Access the home page of the Ronin app and select LiDAR Lens Prole.
2. Tap + on the C1/C2/C3 to add a new prole, then select Lens Brand, Lens Series, and Lens
Focal Length.
3. Tap Next to enter the focus ring calibration page, slide the focus ring to ∞, and then tap
Conrm to start lens calibration. The lens prole will be saved after calibration is completed.