dji Focus Pro - DJI Focus Pro All-In-One Combo; Hand Unit Preparation and Activation

DJI Focus Pro User Manual
28
©
2024 DJI All Rights Reserved.
Using DJI Focus Pro All-In-One Combo
The usage of the DJI Focus Pro All-In-One combo is based on the creator combo, and the
addition of the hand unit.
Preparing the Hand Unit
The hand unit is powered by an NP-F550 model battery (not included).
There are ve focus marking rings for users to mark the lens focus for re-use. Attach the focus
marking ring to the focus knob while aligning the port.
Activating the Hand Unit
Activate the hand unit before using for the rst time.
• The hand unit can be used five times without activation. After that, activation is
required for further use. Download and install the DJI Ronin app before activation.
Follow the steps below to activate the hand unit:
1. Press and hold the REC button to power on the hand unit, and select the language on the
touchscreen.
2. Enable Bluetooth on the mobile phone. Launch the Ronin app and log in with a DJI account.
Select Hand Unit, type in the default password 12345678, and activate the hand unit
according to the instructions.
• Make sure the mobile device is connected to the internet during activation.