dji Focus Pro - Product Specifications; LiDAR Specifications

DJI Focus Pro User Manual
44
©
2024 DJI All Rights Reserved.
Specications
LiDAR
Accessory Port Cold Shoe
1/4"-20 Threaded Hole
USB-C Firmware Update Port (Power/USB)
USB-C Data Port (Power/CVBS/CAN)
Image Sensor Resolution: 1920×1440
FOV:
57.4° (horizontal), 44.6° (vertical), 70.1° (diagonal)
Frame Rate: 30fps
Equivalent Focal Length: 30 mm
ToF Sensor Ranging Points: 76,800
Sensing Range: 0.5-20 m
FOV:
Wide-Angle Mode: 65° (horizontal), 40° (vertical), 76.1°
(diagonal)
Telephoto Mode: 20° (horizontal), 20° (vertical), 28.3° (diagonal)
Frame Rate: 30fps
Equivalent Focal Length: 30 mm (wide-angle mode)
Ranging Accuracy: ±1% to 3% (aected by the distance)
Machine Learning Tracking Subject: Can recognize up to ve subjects at the same
time, and choose one to follow
Smart Object Identication: Human, vehicle
Focus Area: Flex Spot (activate focus lock by framing the
subject and pressing the trigger; supports autofocus only, not
ActiveTrack); Wide (when subject-locked on human, supports
both autofocus and ActiveTrack*; when subject-locked on
vehicle, supports autofocus only, not ActiveTrack)
* ActiveTrack is available only when used in conjunction with DJI RS 4
Pro or DJI RS 3 Pro.
Electrical Properties Power Consumption: Average approx. 6.3 W, max 6.8 W
Input Voltage: 6.6-17.2 V
Operating Temperature -20° to 45° C (-4° to 113° F)
Mechanical Properties Main Body Dimensions: Approx. 68×25×57 mm (L×W×H)
Weight: Approx. 140 g (0.31 lbs)
Mounting Method and
Position
Can be mounted directly via cold shoe or using the 1/4"
threaded hole It is recommended to mount the DJI Focus Pro
LiDAR close to the camera's optical axis.