dji Focus Pro - Lens Calibration Settings

DJI Focus Pro User Manual
©
2024 DJI All Rights Reserved.
25
When there is a prompt to adjust the ange, users can conrm using the provided focus card.
Point the lens at the focus card, when the image is clear, this indicates it is not necessary to
adjust the ange. Tap Complete to conrm. If the image is not clear, tap Adjust. Slide left or
right on the slider until the image is clear, tap Complete to complete lens calibration.
Others Settings
1. Recalibrate Lens: If the focus is not accurate, users can recalibrate the lens.
2. Adjust Flange Distance: Users can adjust the ange distance here to eliminate the focusing
error caused by using dierent lens mounts and to make focusing more accurate.
• If the lens model is not found in the LiDAR Lens Prole list, calibrate lens via the grip.
• Recalibrate the lens if the mounting position of the motor changes after lens calibration
is completed to avoid focus inaccuracy.