Tethered control handle × 1
Extended Joystick × 1
control Cable (5 m) × 1
Introduction
The RONIN™- S Tethered Control Handle is used with the Ronin-S Universal Mount for controlling the gimbal’s
movement and camera remotely when the Ronin-S gimbal is mounted on other platforms.
1. Cold Shoe
2. CAN Bus Port
3. Profile LED Indicators
4. Joystick
5. M Button
6. Camera Control Button
7. Sleep Button
8. Rosette Mount
9. 3/8%16 Port
10. DC OUT Port (13 V-17 V/3 A)
11. Trigger
12. Lever
13. 8-pin Port
Installation
Attach the Tethered Control Handle to the Ronin-S’s grip and toggle the lever to the locked position.
To Next Page
Loading...
