EN
8
The status indicator of the focus wheel indicates the calibration
status.
Blinking Pattern Descriptions
Solid yellow
Focus Motor is connected, but not
calibrated
Blinks yellow slowly Calibrating
Solid green Focus Motor is connected and calibrated
Blinks green slowly Point A is set
Blinks green twice Points A and B are set
Focus Motor Status Indicator Descriptions
.
Firmware Update
The focus motor firmware is part of the Ronin-SC firmware.
When new firmware is available, connect the focus motor to
Ronin-SC to update.
• The focus motor must be calibrated every time it is
powered on.
• DO NOT touch the gear of the focus motor when it is
rotating.
Blinking Pattern Descriptions
Blinks red twice Focus Motor error, update rmware
Blinks red slowly Focus Motor is disconnected
Blinks red quickly Focus Motor has stalled
Solid green Calibration complete
Blinks green slowly Working normally
To Next Page
Loading...
