dji RONIN-SC FOCUS MOTOR - Usage; Controlling the Focus Motor

EN
6
6. After mounting the camera dovetail plate and lens support
to the camera, attach the camera to Ronin-SC. Connect the
camera, Ronin-SC, and Focus motor according to the figure
below.
Usage
Control the focus motor by using the focus wheel after
powering on Ronin-SC.
•
To loosen the gear strip, push the gear strip outward
while holding the belt holder tightly. DO NOT pull
out the gear strip forcibly or the gear strip may be
damaged.
•
Trim the gear strip to the required length, leaving
enough for adjustments (if needed).
Connect to Focus
Motor Port
Connect to Ronin-SC
Camera Control Port
Connect
to Camera