dji RONIN-SC - Getting Started; Attaching the Tripod



4. BalancingthePa
nAxis
a. Unlock the three axes. Grab the grip, tilt Ronin‐SC sideways, and check for movement
alongthepanaxis.
b. Loosentheknobonthepanmotor.Adjustthecamerabalanceuntilthecamerastaysstill
whenrotatingthepanaxis45°whileliftingthegrip.
c. Tightentheknob.


Oper
ation
Aft
erinstallation,activationandbalancing,Ronin‐SCcanbeusedinstantlyafterAutoTune.There
aretwowaystoperformAutoTune.
1. LaunchtheRoninapp, gototheMotorpage,andselectAutoTune.
2. PressandholdRonin‐SC’sMbuttonandtriggersimultaneouslyforfoursecondstostartAuto
Tune.
