16
© 2019 DJI OSMO All Rights Reserved.
Operation
Activating Ronin-SC
Ronin-SC needs to be activated through the Ronin app before using for the rst time.
1. Press and hold the power button to power on the gimbal.
2. Enable Bluetooth on your mobile device and launch the Ronin app. Note that a DJI account is required
to launch the Ronin app. Once detected in the list of Bluetooth devices, select Ronin-SC and input the
default Bluetooth password: 12345678. Press the M button six times to restore the default Bluetooth
password.
3. Make sure you are connected to the internet and follow the on-screen instructions to activate Ronin-SC.
Ronin App Settings
After balancing and powering on Ronin-SC, you can adjust gimbal settings through the Ronin App. The
screenshots shown below are based on the iOS version.
To Next Page
Loading...
