dji RS 3 PRO - Pan Axis Balancing

DJI RS 3 Pro User Manual
©
2022 DJI All Rights Reserved.
13
4. Balancing the Pan Axis
a. Unlock the pan axis
. Toggle the lever on the pan arm to the unlocked position .
b. While holding the grip, tilt DJI RS 3 Pro forward, and rotate the pan arm until parallel with you.
c. Check the movement of the pan axis. If the camera lens rotates to the left, push the pan axis to
the right
. If the camera lens rotates to the right, push the pan axis to the left .
d. Toggle the lever on the pan arm to the locked position. The pan axis is balanced when the
camera is steady when rotating the pan while tilting the grip.
2
3
1
If mounting a longer camera system, it is necessary to use DJI R Roll Axis Counterweight
Set. Visit the ocial DJI store to purchase the counterweight set.
The levers on the pan and roll motor can be pulled out to adjust the tightness.