dji RS 3 PRO - Using For The First Time; Charging the Battery; Attaching the Extended Grip;Tripod

DJI RS 3 Pro User Manual
6
©
2022 DJI All Rights Reserved.
Using For The First Time
Charging the Battery
Before using for the rst time, charge the battery grip through the power port using a charging cable
(included) and a USB adapter (not included). It is recommended to use a USB adapter with QC 2.0 and
PD protocol (max. 24 W).
During charging and usage, the battery level indicators indicate the battery level. When not in use, press
the battery level button to check the battery level.
LowHigh
Attaching the Extended Grip/Tripod
1. Attach the extended grip/tripod to the grip , tighten , and then unfold the tripod .
2. Insert the grip into the gimbal as shown
. Make sure the grip lever is in the unlocked position, and
then toggle to the locked position after attaching
.
2
1
4
3
5
Safety Button
To remove the grip, toggle the lever to the unlocked position, hold down the safety button, and pull the
grip away from the gimbal.