dji RS 3 PRO - Trigger and Dial Controls; Battery and Port Identification; Automated Axis Locks

DJI RS 3 Pro User Manual
16
©
2022 DJI All Rights Reserved.
Trigger
Press and hold to enter Lock mode. Tap the touchscreen to stay in lock mode,
then the trigger can be released.
Tap twice to re-center the gimbal.
Tap three times to turn the gimbal 180° so that the camera faces you (selfie
mode).
Tap once to start ActiveTrack (requires DJI LiDAR Range Finder (RS) or DJI Ronin
Image Transmitter to be enabled).
Front Dial
Turn to control cable-driven focus/zoom by default, the settings can be changed
via the touchscreen.
Check the Ronin Series Compatibility list for detailed information on supported features.
Battery Level Button
Press once to check battery level.
RSS Camera Control Port:
for connecting the camera.
Focus Motor Port:
for connecting the focus motor.
Video Transmission/LiDAR Range Finder Port:
for connecting the DJI
Video Transmitter, DJI Ronin Image Transmitter, or DJI LiDAR Range Finder.
Ronin Series Accessories (RSA)/NATO Ports
For connecting the DJI R Focus Wheel, DJI R Twist Grip Dual Handle or the DJI
RS Briefcase Handle.
Automated Axis Locks
The Automated Axis Locks are set to fold and lock when powering on/o and recenter and lock
when RS 3 Pro enters/exits sleep mode. Axis locks will unlock automatically after powering on
and will lock by pressing once or twice on the power button. Set the axis locks movement on the
touchscreen menu. The axis locks can be locked/unlocked manually.