dji RS 4 - Page 11

DJI RS 4 / RS 4 Pro User Manual
©
2024 DJI OSMO All Rights Reserved.
11
1. Attach the Upper Quick-Release Plate
Attach the upper quick-release plate to the bottom of the camera with the 1/4" screw in the
screw kit. Snap the adjustable placement guide onto the camera body before locking the
screw.
• During mounting, if the pan axis lever, roll axis lever, and knobs on either side of the
mounting plate interfere with the camera, lift up the levers or knobs to reorient them.