dji RS 4 - Tilt, Roll, and Pan Axis Balancing

DJI RS 4 / RS 4 Pro User Manual
©
2024 DJI OSMO All Rights Reserved.
15
2. Balancing Depth for the Tilt Axis
a. Rotate the tilt axis so that the camera lens is pointing forward.
b. Check to make sure the camera is not front or back-heavy. If front-heavy, move the
camera backward by turning the knob. If back-heavy, move the camera forward. Unlock
the lever on the mounting plate and move the lower quick-release plate back and
forth to adjust the center of gravity.
c. Move the lever on the mounting plate to the locked position. The tilt axis is balanced
when the camera is steady while tilted up or down by 45°.
d. Lock the tilt axis .
1
2
2
3