dji RS 4 - Vertical Shooting Balancing

DJI RS 4 / RS 4 Pro User Manual
18
©
2024 DJI OSMO All Rights Reserved.
Balancing in Vertical Shooting
1. balancing the Vertical Tilt
a. Unlock the tilt axis .
b. Follow the figure below (top view) and rotate the tilt axis so that the camera lens is
pointing upward. Check to make sure the camera is not top or bottom-heavy. If top-
heavy, move the camera backward. If bottom-heavy, move the camera forward. Loosen
the mounting plate knob and move the mounting plate back and forth to adjust the
center of gravity.
c. Tighten the mounting plate knob while holding the camera upward. The vertical tilt is
balanced when the camera is steady while pointing upward.
1
3
2