dji RS 4 - Page 41

DJI RS 4 / RS 4 Pro User Manual
©
2024 DJI OSMO All Rights Reserved.
41
Timelapse
In Timelapse, the gimbal triggers the camera to capture still images with the set interval time
and will automatically stop when completed. The duration for the Timelapse and the frame rate
can be set so that the gimbal can calculate the exact number of images required.
By enabling Push mode, users can manually adjust the pan and tilt axes before starting the
Timelapse. Users can push the gimbal to alter the camera orientation and adjust the framing.
Tap the virtual joystick icon to use the virtual joystick to adjust the camera orientation.
Motionlapse allows users to set up to five waypoints so that the camera moves during the
Timelapse.
To adjust the position of a waypoint, adjust the camera to the desired position, and tap the +
icon to conrm the waypoint. You can also use the virtual joystick to control the pan, tilt, and
roll axis as well.
To add another waypoint, move the gimbal to the next waypoint, and tap the + icon above the
grid map. Afterwards, to delete a waypoint, select the waypoint and tap the trash icon. After
setting up the waypoints, you can either tap Preview to make sure the Motionlapse includes
everything or tap the shutter/record button to start shooting. Make sure the camera and gimbal
have been connected using the corresponding camera control cable.