EasyManuals Logo

dji RSC 2 Manual

dji RSC 2
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
To remove the lower quick-release plate, toggle the lever on the camera mounting plate to the
unlocked position and remove the lower quick-release plate while pressing the safety lock on the
mounting plate.
4. Connect the Camera Control Cable.
Choose the proper camera control cable according to the camera type. Plug one end of the cable
into the RSS camera control port of the gimbal and plug the other end into the camera.
Balancing
Balancing is required before shooting. Before balancing, make sure to power on the camera if using
an optical zoom lens and to select the focal length if using a varifocal lens. Make sure DJI RSC 2 is
powered off or in sleep mode before balancing.
1. Balancing the Vertical Tilt
a. Unlock the tilt axis and loosen the mounting plate knob.
b. Rotate the tilt axis so that the camera lens is pointing upward. Check to make sure the camera
is not top or bottom-heavy. If top-heavy, move the camera backward. If bottom-heavy, move the
camera forward.
c. Tighten the mounting plate knob while holding the camera upward. The vertical tilt is balanced
when the camera is steady while pointing upward.

Other manuals for dji RSC 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dji RSC 2 and is the answer not in the manual?

dji RSC 2 Specifications

General IconGeneral
TypeHand camera stabilizer
FoldableYes
Material-
Mounting1/4\
ApplicabilityUniversal
Product colorBlack
Number of axis3
Tilt angle range0 - 360 °
Angle of rotation360 °
Compatible productsSony: A9/A9 Ⅱ, A7M III/A7S III/A7R IV/A7R III/A7R II/A7S II/A7M II, A7S, A6300/A6100/A6400, A6600/A6500; Panasonic: GH5S/G9, GH5, GH4/GH3, S1, S1H; Nikon: Z6/Z7, Z50, D850, D780, D6/D5; Canon: EOS R5/EOS R6, EOS RP, 5D MK III/5D MK IV/5DS R, 6D MK II/90D, 80D/6D, EOS-1DX Mark II/EOS-1DX Mark III, EOS 77D; FUJIFILM: X-T3/X-T2, X-T4, X-H1, X-T30/X-T20/X-E3; Black magic design: BMPCC 4K, BMPCC 6K; Z CAM: Z CAM E2; Olympus: OM-D E-M1 II;
Maximum weight capacity3 kg
Bluetooth version5.0
Battery type18650
Charging time2 h
Operating time14 h
Battery voltage7.2 V
Battery capacity3400 mAh
Operating temperature (T-T)-20 - 45 °C
Cables includedUSB
Package depth275 mm
Package width330 mm
Package height103 mm
Package weight1950 g
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width185 mm
Height400 mm
Weight1216 g
Dimensions folded (WxDxH)260 x 210 x 75 mm

Related product manuals