Battery Care and Maintenance
Battery Firmware
You should always have your batteries on the same firmware version as your aircraft, and both
ideally on the latest official firmware. For drones with dual-battery design, both batteries need to
be on the same firmware version otherwise you cannot take off. You can find the latest official
firmware by navigating to the product page on the DJI website, going to the Downloads section,
and viewing the Release Notes. Within the Release Notes, you can see the latest firmware
versions.
To confirm your aircraft and battery are on the latest firmware you can open the DJI Pilot app,
go into your manual flight camera view, click on the three dots in the top right, then the three
dots in the side menu, scroll down to the “About” option, and click to view current firmware
versions. You can also connect your mobile device (Smart Controller, Crystal Sky, etc…) to the
internet and when you turn on the aircraft and open the Pilot app you will be notified of any
necessary updates.
To Next Page
Loading...
Need help?
General
