10
©
2023 DJI All Rights Reserved.
EN
Menu
In the home screen, press the menu dial on the video transmitter to enter the menu. Users can
set the device number, enable Broadcast mode, select Broadcast image quality, select language,
and view the video transmission channel status and device information. Turn or press the dial to
select or conrm settings in the menu. Press the back button to return to the previous screen.
Broadcast Image Quality
When Broadcast mode is enabled, the Broadcast Quality setting will appear in the menu. Select
between HD and Smooth. These two kinds of image quality correspond to 40M (HD) and 20M
(Smooth) for the Downlink Bandwidth setting on the remote monitor. When the image quality is
set to Smooth, more channels are available than HD.
Type-C Function
Select USB when using the USB-C port for the rmware update in DJI Assistant 2.
In Control mode, set the Type-C function on both the transmitter and receiver to Voice Call and
connect headphones with a built-in mic to the USB-C ports to enable voice calls between the
transmitter and receiver. Use the volume buttons on the headphones to adjust the volume for
voice calls.
View the compatible headphones on the FAQ page of the product page on the ocial DJI website.
Other 48kHz/16bit digital headphones are also supported.
Firmware Update
Update the video transmitter using the DJI Assistant 2 (Ronin Series) software.
1. Power on the device. Make sure the Type-C function is set to USB on the menu. Connect the
device to a computer with a USB-C cable.
2. Launch DJI Assistant 2 (Ronin Series) and log in with a DJI account.
3. Select the device and click Firmware Update on the left side of the screen.
4. Select the rmware version.
5. The rmware will be downloaded and updated automatically.
6. The device will restart automatically after the rmware update is complete.
To Next Page
Loading...
