dji zenmuse z30 - Upgrading the Firmware; Firmware Update Preparation

© 2016 DJI All Rights Reserved.
11
Micro SD Slot
Upgrading the Firmware
Mount the gimbal and camera to the aircraft and follow the steps below to upgrade
the rmware using a Micro SD card. Using the Matrice 600 as an example.
Keep the power supply switched on during the upgrade.
Ensure that there is only one version of update file in the Micro SD
card, or else there will be an update error.
The Z30 rmware is only for upgrading the camera and gimbal, not for
the aircraft.
Step 1- Check the Battery Level and Micro SD Card Storage
a. Ensure that the Intelligent Flight Batteries have at least 50% power level.
Power on one of the batteries and ensure that other batteries are triggered
automatically. If not, nd solutions in the DJI GO app.
b. Ensure that there is at least 100MB of free space on the Micro SD card.
Managing your Photos and Videos
Playback
Tap in the DJI GO app to review photos and videos that you have captured.
Press the same button again to return to capturing images.
Downloading your Files
Download your photo and video les to your PC using a Micro SD card reader.