6BACK TO MAIN MENU
MAINTENANCE
HOW DO I MAINTAIN MY CHIPPER?
PROCEDURE BEFORE EACH USE EVERY 3 HOURS EVERY 25 HOURS EVERY 100 HOURS
CHECK ENGINE OIL LEVEL
CHECK GENERAL EQUIPMENT
CONDITION
CHECK WEDGE FOR SHARPNESS
CHECK BELTS
CHECK TIRE PRESSURE
CLEAN ENGINE EXTERIOR AND
COOLING
CHANGE ENGINE OIL
REPLACE AIR FILTER
REPLACE SPARK PLUG
Regular maintenance is the way to ensure the best performance and long
life of your machine. Please refer to the OPC566E Operations Manual for in-
depth maintenance procedures.
WARNING: BEFORE PERFORMING ANY MAINTENANCE PROCEDURE
OR INSPECTION, STOP THE ENGINE, WAIT FIVE MINUTES TO ALLOW
ALL PARTS TO COOL. DISCONNECT THE SPARK PLUG WIRE, KEEPING IT
AWAY FROM THE SPARK PLUG. DISCONNECT THE BATTERY TERMINALS
ELECTRIC START ONLY.
ENGINE SERVICE: Please refer to the KOHLER® Command Pro Engine’s
service manual for engine maintenance.
To Next Page
Loading...
